Intelligent Appliance Control

Zone 1

CO GAS INSIDE THE SUPPLY DUCT

A faulty furnace can produce low to dangerous levels of CO which can be distributed to everyone in the home through the ventilation system.


CO/PRO® monitors for CO gas in the supply duct and TURNS THE FURNACE OFF when 25 ppm of CO is detected.


Dual zone Carbon Monoxide leak monitor

When CO levels drop to 15 ppm or less, power is reapplied!

 Zone 2

 ESCAPED 
 EXHAUST GAS IN 
 THE AMBIENT AIR

Exhaust systems can become clogged by animals and vent joints can crack, forcing low to dangerous levels of CO into the home's ambient air. 


CO/PRO® monitors for CO in the ambient air from the exhaust systems and TURNS THE FURNACE AND WATER HEATER OFF when 25 ppm of CO is detected.

PROactive Monitoring

Furnaces, water heaters, and their exhaust systems are primary sources of carbon monoxide (CO) that can fail at any time from:


  • Cracked heat exchanger
  • Spillage / backdrafting
  • Rollout
  • Animals/nests in exhaust pipes
  • Rusted or cracked exhaust pipes
  • Clogged filter ..and more


When these failures occur, carbon monoxide can be released into the home's air that's too low of a level to be detected by a traditional consumer CO detector. 

Carbon Monoxide detection and protection ranges

Going beyond the "beeping" detector.

Designed for Furnaces and Water Heaters

Works with all fuel-burning furnaces and tank-based water heaters.


Combined Duct and Ambient Air Detectors

Equipped with two independent carbon monoxide (CO) sensors.


Active Leak Detection and Air Quality Monitoring

Comprehensive monitoring for CO in the supply duct and ambient air.


Smart and Responsive

Automatically takes action-even when you're away.


Automatic Appliance Shutoff

Powers down appliances when CO levels exceed 25 ppm, preventing dangerous CO build-up.


Self-Restoring Functionality

Restores power to appliances once CO levels drop below 15 ppm.


Proudly  Made in the USA from imported components.


CO/PRO® Dual Zone Carbon Monoxide Shutoff Switch

Furnaces, water heaters, and their exhaust systems are primary sources of carbon monoxide (CO) that can fail at any time from:


  • Cracked heat exchanger
  • Spillage / backdrafting
  • Rollout
  • Animals/nests in exhaust pipes
  • Rusted or cracked exhaust pipes
  • Clogged filter ..and more


When these failures occur, carbon monoxide can be released into the home's air that's too low of a level to be detected by a traditional consumer CO detector. 

CO/PRO - Compliments Home CO Detection

15%

..of all (CO) poisoning-related deaths were caused by furnace and water heating systems.

> 50%

...of the traditional home (CO) detectors that were tested failed to function properly.

10 Million

..people in the U.S. are more sensitive to CO levels below what's supported by current CO detectors.

 Who's at HIGHER Risk for Low Level CO Poisoning?

It's estimated that over 10 Million people in the U.S. are more sensitive to CO levels below what's supported by current CO detectors.

Child Pregnang Mom

Expecting Moms & Children

Chronic exposure to CO during pregnancy can cause permanant damage to fetal brain cells

Sick Immune Compromised at home

Immunocompromised

Those with allergies, asthma, colds, flus, COVID, cancer, autoimmune diseases & more...

Elderly at home

Elderly

Long term exposure causes a significant increase in heart disease deaths and hospital admissions

Pets at home

Pets

One third of all U.S. homes have pets that are susceptible to CO and can't respond to CO alarms

Long-term exposure to low levels of carbon monoxide (CO) can affect anyone at any time independent of their age or health and produce symptoms that mimic many sicknesses and diseases.

Carbon monoxide (CO) is an invisible, odorless, and deadly gas.

Furnaces, water heaters, boilers, and their exhaust systems can fail from:


  • Cracked heat exchanger
  • Spillage / backdrafting
  • Rollout
  • Animals/nests in exhaust pipes
  • Rusted or cracked exhaust pipes
  • Clogged filter ..and more


When these failures occur, carbon monoxide gas can be released into the home's air that's too low of a level to be detected by a traditional consumer CO detector. 

It's estimated that over 10 Million people in the U.S. are more sensitive to CO levels below what's supported by current CO detectors.

Respiro AHR Dealer Design Award Winner Indoor Air Quality Carbon Monoxide Leak Detector


"This unit provides way more protection to homeowners and reduces liability for contractors"

CONTRACTOR JUDGE #1


"The multiple ways it monitors is different than standard CO monitors"

CONTRACTOR JUDGE #2


"I like that this is a low-level detector, as most on the market don't alarm to over 40 ppm, and this starts below 25 ppm"

CONTRACTOR JUDGE #3

Monitoring for CO at the sources that can produce it and taking action is important because long-term exposure to low levels of CO is unhealthy and can produce symptoms that mimic many sicknesses and diseases.

  • Designed for Furnaces and Water Heaters – Compatible with new and existing systems.
  • Dual CO Sensors – Independently monitor separate zones for comprehensive detection.
  • Comprehensive Coverage – Tracks CO in supply ducts and in the ambient air from exhaust systems.
  • Smart Response – Automatically protects your home, even when you're away.
  • Automatic Shutoff – Turns off appliances if CO exceeds 25 ppm.
  • Self-Restoring – Restores power when CO drops below 15 ppm.
  • Made in the USA from imported components!


Dual zone Carbon Monoxide leak monitor
  • Designed for Furnaces and Water Heaters – Perfect for both new and existing systems, offering unmatched compatibility.
  • Combined Duct and Vent Detection – Equipped with two independent carbon monoxide (CO) sensors for superior detection.
  • Comprehensive Monitoring – Actively tracks CO levels in the supply duct and ambient air, ensuring safety from exhaust system emissions.
  • Smart and Responsive Safety Measures – Automatically takes action to protect your home, even when you're away.
  • Automatic Appliance Shutoff – Powers down appliances when CO levels exceed 25 ppm, preventing dangerous build-up.
  • Self-Restoring Functionality – Restores power to appliances once CO levels drop below 15 ppm, ensuring convenience and peace of mind.
  • Proudly Made  in  the USA from imported components – Crafted with care using high-quality imported components for durability and performance.


Dual zone Carbon Monoxide leak monitor

Click to Play


Respiro AHR Dealer Design Award Winner Indoor Air Quality Carbon Monoxide Leak Detector

ACHR's Silver IAQ Winner


"This unit provides way more protection to homeowners and reduces liability for contractors", said Contractor Judge #1


"The multiple ways it monitors is different that standard CO monitors", said Contractor Judge #2


"I like that this is a low-level detector, as most on the market don't alarm to over 40 ppm, and this starts below 25 ppm", said Contractor Judge #3


CO/PRO® 2 Installation Manual

Slide Title

Slide description

Download
CO/PRO® 2 Installation Manual

Slide Title

Slide description

Download
CO/PRO® 2 Installation Manual

Slide Title

Slide description

Download
Respiro AHR Dealer Design Award Winner Indoor Air Quality Carbon Monoxide Leak Detector

CO/PRO Wins in ACHR's Dealer Design Awards!

Button
Respiro AHR in TheNews

CO/PRO apears in theNEWS!

Button

Featured Product: CO/PRO

Button
Respiro AHR in TheNews

VIDEO - CO/PRO in theNEWS

Button

CO/PRO Wins in ACHR's Dealer Design Awards!

Button

CO/PRO apears in theNEWS!

Button

Featured Product: CO/PRO

Button

VIDEO - CO/PRO in theNEWS

Button
CO/PRO® Carbon Monoxide Shutoff Switch

We monitor for CO and turn off appliances here...

... to stop CO from building up here.

Respiro

Every year there are overwhelming news stories and articles about carbon monoxide-related poisonings and deaths.  With all the advancements in technology, we knew there had to be a better approach. 


Our Mission

Respiro is committed to making the air people breathe in their homes and work safer.  Our mission is to eliminate all instances of CO deaths, CO poisoningS, and CO-related illnesses.


Made in the USA from Imported Components

Even though today's microprocessors, sensors, and other electronic components come from countries outside of the U.S., we are proud to say that the CO/PRO® is designed, built, and tested right here in the great USA! 

  • Slide title

    Write your caption here
    Button
  • Slide title

    Write your caption here
    Button
  • Slide title

    Write your caption here
    Button